Genie trim saw attachment, Diamond Pacific

Description

The trim saw attachment will turn your Genie,  (Diamond Pacific Tool Corp.), into a handy 8″ trim saw in a matter of minutes. On back order! Please note the photo shown is similar to the newer model, but is not exact. It is easy to install, requiring no tools. Remove the three Nova wheels on the right hand side of the Genie machine. Place the saw pan under the shaft. Mount the saw blade on the adapter and spin it onto the right hand shaft. Slip the saw table and hood into place, fill the pan with five pints of water, and you are ready to go. Since the saw uses water as a coolant, there is no oily mess or dangerous fumes. (Blade coolants: SOFT ROCK: use water, water soluble oil, or oil; MEDIUM HARD ROCK: use a water soluble oil or oil; HARD DENSE ROCK SUCH AS AGATE: use oil coolant only.) The unique angle block included with the trim saw allows you to finish-trim the edges of your cabs at a ten degree angle, giving you a headstart towards grinding the bezel of your cab. Your trim saw comes with a sintered continuous thin rim blade, size 8″ x .032 x 1″ bore. This is a good all-purpose cutting blade. It is not recommended that blades that are much thicker or thinner than the .032 (rim thickness) blade supplied be used with this attachment. Thicker blades do not cut well with water as a coolant. Thinner blades need a higher RPM to “stiffen” them, and are more hazardous to use. The trim saw attachment also comes with molded, durable plastic hood and pan, sintered continuous thin rim blade, size 8″ x .032″ x 1″ bore, shaft adapter, angle block, sample bottle of Water Aid, splash guard, and SAFETY GLASSES THAT MUST BE WORN WHEN OPERATING THIS TRIM SAW.

Stock 100-TSG-105  Weight 8 lbs. FOB Barstow, CA